Відео

I bet 5£ you are the guy that think everything in this world is expensive😂

Thanks for the great video (plus the one removing oil from a mercury engine when laid down incorrectly). I bought a second hand mercury 3.5 a week ago, worked perfectly when the guy demo'd it for me. However when I got it home I did exactly what you warned against. Now after your very helpfull videos it works fine again - Big thanks!

Keep lifting! I am 61 and still lifting. Old guys rule!

Was thinking of buying one of these ex BT fleet Ducato's myself to convert into a campervan. As far as I'm aware there is a chimney/vent on the back of the roof where you would probably place solar panels. Will you be fitting solar? If you are will this vent not get in the way of this?

The first bend on the warm air outlet will lose 1/5th of the output heat, so try to duct in straight line. I believe there is a limit on the outlet hose length of 2m, otherwise the fan is going to struggle getting the throughput - not sure if there is over heating / strain on air pump otherwise. Having the unit outside will create positive air pressure in the room you are hearting (if you do not duct the air inlet for air warming - black inlet fan from air inside the room). You should always have an air quality monitor (these diesel heaters do give off particulates) and an alarm with these - you cannot smell Carbon Monoxide, it is a deadly poison. Keep the exhaust hose away from wood or combustibles - it will get hot enough to start fires. Keeping heater unit outside (protected from weather) is better option - reduction of pollutants and formaldehydes.

😎👍🇻🇪🤔💰😭🏍️

Thanks for sharing, my Mum has a 2016 Fiat 500 and her mirror fell off and she panicked as it's a minor traffic violation (police ticket) here in the States if traffic officer notices. All due to your video, she's happy, I'm a little sweaty and happy as well and she's back on the road no worries.

Can you use this on dash boards ect

That's great, thank you, I'll make one for my husband :)

Just wanted to say thanks for the video I had exactly the same problem I would never of guessed that it was this cheers

Hello is this model got the iveco engine

the main question is,,,,is it economical??

Why do you still have all your fingers?

lick your fingers and put the spit along the wire and it will slide very easy and then in the reverse to slide it on

I don't get it. You worry about sterilizing the jar, then you fill it full of vinegar. Nothing will grow in there, man.

Well you learn something new everyday 😂😂

Does the cap change the efficiency of the stove?

This solved my problem! Back up and running with my original 1999 model multipro 395 type 5.. running 25 years now.

Great video. Thank you sir.

Hey Mark did you ever figure out why the gray knob that is the fuel diverter didnt seem to make a difference? Trying to see if it can be used to shut off the fuel in order to drain the carb.

Thank you Sir!!!! My 3000 just died on me... and found your video. Exact problem that i have. Wire from the coil broke. .. All Fixed now!!! Cheers!

The guy David McLucky, i think, recomends starting your heater every month when not in use and running it on high. Been a few years, no problems yet!

My problem is trying to take out the old one, was probably sealed back in the day and is stuck firm 😡

I'm shocked watching this vlog your clearly not an electrician this is not how you wire a consumer unit as the supply should come in through the top of the RCD and feed via a busbar along the bottom into the MCB's, the load is taken from the top of the MCB's, there are too many youtubers that are showing vlog's that have no experience of electrical installation. I've been an industrial and commercial electrician for nearly 40 years, It seams everyone who carriers out van builds are an expert in electrical installation, My advice is check the information with a qualified tradesman and DON'T trust what you see on youtube no matter how professional they seam.

Every original thing cannot be perfect, even moon has spots.. Feeling hungry.

Will do Mark. I'll be sure to get back to you 🎉

You the same sink as mine in a CI motorhome, but I want to know how to disconnect the water pipes though?? 😏

i think it looks thin I'm not sure about buying

Nope, doesn't work

Why buy new tyres ( especially after paying nearly €1600 for that set) just swop the rears onto the front and get another 15,000 miles+ without spending more. BF Goodrich AT's are very well regarded, and seem to never pick up punctures compared to other brands.

Nao estou consgeuindo fechar devolta, poderia ensinar?

Magic. Video is in reverse

witchcraft

Haha - first time! (right to left) 🤣

Oooohhhh

What a difference a lot more usable space 👍

Great bit of kit

Hi I am only getting tension on the left side the right does not seem to roll up any ideas?

Hi. Any idea on how to remove the springs underneath. I have a seized exciter. Thanks

I will be going for BFG AT’s on my Jeep GC WJ when I get my wheels refurbished. I need them more off road then on road but still think they will be a good compromise between purely on or off road tyres.

Which tires do you fit? thanks

Well done good video.

Try reading the instructions. You did everything bass-ackwards

Black Monday Toast 😂

Hi Mark. Ive just found your video and you are going ok, but if you look at the tip of your bar you will find a tiny hole! This is for the grease to be applied for when operating the saw. The bar you have now is not a rollermatic by sthil, it looks aftermarket. You can buy the grease gun on line, so to grease the end roller each time before use. This way it won't sieve on you when it gets to hot. I hope this helps?

hi mate!!I have same model but 30 hp!!! They say by puting 40 hp carb on my 30 will make it like a 40 hp?!

How easy is the to clean?

so nice, this one is really old! Just 2 days ago I was cleaning my Primus 70, after decades of being stored in my container... I`ve been using Primus stoves since childhood (boat and fisherman`s cabin) and I love that brass! (fine swedish craftmanship, like my knives and axes) You lucky, what a find! greetings from wild, wet, windy and wonderful Western Patagonia

I only wanted to know how to get a thumb turn off a lock but I was so invested in whether you would find a grub screw that fits, I could not scroll away 😂 Thanks for the video.

At least it was still on the roof think i told you about mine flying of due to them plastic things you hold the panel the holes spilt where your screws go over time...recommend you use aluminium instead i replace all of mine now.